DeckHardware News - DeckHardware - Marine Solutions Australasia

Note: This website uses Javascript to enhance your experience. You appear to have it switched off, or an incompatible browser. You can continue, but some features may be unavailable.

Enter Keywords to Find Products

Create Profile Sign In

Your Shopping Cart

Your shopping cart is empty.

Liros is the Official Rope Supplier to the Australian Sailing Team

Australian Sailing Team joins forces with Liros >><< John Hurley will be missed

Wednesday, 24 March 2010

Billy Bung join our product range

The DeckHardware Team are very excited to announce that soon the Billy Bung will be available in Australia. We will be showing the Billy Bung for the first time at the Sanctuary Cove Boat Show.

The Silly Billy Safety Bung self seals and self drains.

You never take it out of the boat so you never lose it, and if you forget to tighten it up it will seal itself.

The Silly Billy Safety Bung is the only self sealing self draining safety bung in the world (patent pending).

Doesn’t your family deserve a Silly Billy Safety Bung right now?

Park boat in a comfortable area
Remove the existing plug and drain assembly
Bore out existing bung hole to 40mm to receive the Billy Bung drain
Seal around drain using a suitable sealant
Place Billy Bung’s drain into the hole
Pre-drill the screw holes then screw Billy Bungs drain into place using the screws supplied
Screw Billy Bung's plug into the drain, then out no more than 3 full turns (this will allow Billy Bung to drain for you)

Always be sure to screw your Billy Bungs plug closed before launching
If you forget to close your Billy Bung plug before launching, the Billy Bung plug will seal anyway, stopping water gushing into your boat
Although not recommended, using your Billy Bung in the open position when the boat is in use will allow any water to drain while travelling along

Your Billy Bung plug should be screwed closed while the boat is in the water
Care and attention is required by the operator if you leave Billy Bung in the open/drain position while the boat is in the water
It is important to keep the hull area free of debris etc that could cause Billy Bung to be less effective