Walder joins the DeckHardware range
The Walder boom brake is an essential safety device that ensures the indispensable protection of your crew and equipment.
Why a boom brake ?
Jibing remains a delicate and dangerous maneuver for even the most experienced sailor.
To eliminate the dangers inherent when jibing, the WALDER® boom brake controls the horizontal and vertical movement of your boom – allowing it to sweep gunwale to gunwale with complete safety.
The braking effect is achieved by the frictional force produced as the line slides and tightens around the drum of the WALDER® boombrake. The boom is not stopped dead in its tracks but, rather, travels from gunwale to gunwale in a gentle controlled sweep.
With the WALDER® boombrake rigged, all that’s needed when sailing down-wind is to apply tension to the line, without leaving the safety of your cockpit. You’re really not need to climb on the deck.
In addition to providing safety and ease in jibing the WALDER® boombrake :
-
eliminates your preventer
-
stabilizes the boom while you reef in safety
-
stabilizes the boom when you furl your sail
-
fixes the boom in place at anchorage
-
allows problem-free sailing when running “wing and wing”
The Walder boom brake is an essential safety device that ensures the indispensable protection of your crew and equipment.
Have a look at the Walder Boom Brake range.
Categories
Archives
- May 2012
- April 2012
- March 2012
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- July 2011
- June 2011
- May 2011
- April 2011
- March 2011
- February 2011
- January 2011
- December 2010
- November 2010
- October 2010
- September 2010
- August 2010
- July 2010
- June 2010
- May 2010
- April 2010
- March 2010
- February 2010
- December 2009
- November 2009
- December 1999



