Are you thinking of building a new Dinghy or Skiff this winter?   Perhaps you are stripping your current boat and spending the winter rebuilding it?

 

If so contact our office on  02 9905 9400 or info@deckhardware.com.au  and talk to us about a fitout for your boat.   Now that we have the Allen Range of products to compliment the Rope we can assist you in more ways than ever!  

 

We now have Allen Products in stock with more on it's way!

Looking for boat fittings?

Allen Brothers have the capacity to produce thousands of different products. Allen have been in the performance hardware business since 1956 and are passionate about producing hardware capable of achieving the best results.

 

Look at the majority of sailing dinghies in the world and you'll find products designed and manufactured by Allen.

 

 Here is just an example of the range of products now available through DeckHardware:

 

Allen's high performance range of dynamic ball bearing blocks, ball bearing cam cleats and ball bearing traveller cars are designed and manufactured with the highest quality, performance and innovation as the main priority and all skillfully produced at their own factory in the UK.

 Work on our range of blocks has headed the effort to find new standards of performance and construction. We invented the science behind the patented Allen dynamic bearing technology, and all our high performing blocks use this as a basis of the inner bearing system. We also invented and patented the Ultra-strap technology, a very narrow strap of high strength stainless steel, which can be lashed without the fear of line abrasion associated with blocks of traditional strap construction.

 

Allen’s cam cleats have had over 50 years of meticulous research and development to perfect their design. Available in either alloy or Alanite (a super-light, supertough carbon composite) the jaw profile optimises rope entry and exit for smooth cleating and un-cleating. Inside the cleat, double coil springs and ball bearing technology give consistent cam action. The Alanite cleats are light and tough, the composite material designed to diffuse the build up of heat away from the jaws giving incredible wear resistance. For ultra hardwearing applications you can’t beat the alloy series cam cleat for strength and durability without shredding your lines.

 

Compact and lightweight, made from high quality stainless steel, Allen’s vernier adjusters are the only choice when fine –tune rig adjustments are required. New to the range is the A4772DR-KIT heavy-duty vernier adjuster with captive de-raker. Made from heavy-duty 14 gauge 316 stainless steel, it easily handles higher loads and with the aid of calibrated settings, fast pins and captive de-raker, the result is easy fine-tuning on the water. It is also available in a compact version ( A4772SDR-KIT ) where there is limited requirement for rake change between light and heavy airs.

 

Liros Magic Pro Sheet 01507

A halyard or a sheet designed exclusively for dinghies, catamarans and sportsboats. The low stretch characteristics are delivered by the LIROS Dyneema Procore. Designed to be used with the cover stripped. The cover needs only to be used where the rope is being handled.

 

Are you looking for Trapeze setups?  We can do that too!  These are already selling well.

 

 

 

Contact us at DeckHardware for your next fitout!  We have a HUGE range of Liros Rope available from Polyester to Dyneema SK90!  

 

Our Office: 02 9905 9400 or info@deckhardware.com.au you can check out our website for more information: www.deckhardware.com.au