Spars and Rigging Accessories
Using the very latest technology, Allen designs and manufactures a high quality range of stainless steel mast accessories, from stay adjusters, mast tangs and straps, Highfield levers and vernier adjusters. Having previously manufactured a large range of spars Allen have an archive of products specially designed to integrate with most specs.
New to the range is the A4772DR-KIT heavy duty vernier adjuster with captive de-raker. Made from heavy duty 14 guage 316 stainless steel it easily handles higher loads and with the aid of calibrated settings, fast pins and captive deraker make fine tuning on the water a doddle. It is also available in a compact version (A4772SDR-KIT) where there is limited requirement for rake change between light and heavy airs.
316 stainless steel slider with loop and screw.
Part
Description
Length
mm
...
[ more info ]
[ more info ]
Roller furling gear for Jibs and headsails.
Roller furling swivels and bases.
Roller furling control line spools.
...
[ more info ]
[ more info ]
Fixed and Sliding Goosenecks.
Part
Description
Pin
Dia mm
Fixing Hole
Size mm
...
[ more info ]
[ more info ]
Cast aluminium, hard anodised hook racks for mast and stainless steel halyard lock.
Part No.
Description
...
[ more info ]
[ more info ]
Ratchet and non ratchet stainless steel highfield levers for jib and rig tensioning.
Part
Description
...
[ more info ]
[ more info ]
Nylon end plugs, caps and heals for masts and booms.
Part
Description
Tube ID
mm
Tube ...
[ more info ]
[ more info ]
Stainless steel mast and boom straps for different makes kicking strap brackets.
Part
Description
...
[ more info ]
[ more info ]
Mast Gate and Step
Part
Description
Length
mm
Width
mm
Thickness
mm
...
[ more info ]
[ more info ]
Mast tangs are particularly important for use on sealed section masts and are a useful and efficient method ...
[ more info ]
[ more info ]
Special Stainless steel gooseneck and spinnaker crane for Mirror dinghy spars.
Part
Description
Fi...
[ more info ]
[ more info ]
316 Stainless steel rigging screws.
Part
Description
Thread
Max Length
mm
Min ...
[ more info ]
[ more info ]
Allen sheave boxes are available with either plain or ball bearings, a choice of sheave material, Acetal resin, pressure die cas...
[ more info ]
[ more info ]
Allen spinnaker pole mast brackets are available in 316 Stainless Steel or Acetal resin, designed to suit Allen spinnaker and ji...
[ more info ]
[ more info ]
Nylon spinnaker pole end spikes and hooks, piston triggered spinnaker pole ends are made from tough composite reinforced nylon w...
[ more info ]
[ more info ]
Spreader accessories for fine tuning spreader length and spreader angle to the mast. Also spreader section and spreader end caps...
[ more info ]
[ more info ]
Compact and lightweight, made from high quality stainless steel, Allen’s vernier adjusters are the only choice when fin...
[ more info ]
[ more info ]
High quality nylon and 316 stainless steel thimbles for wire and rope for halyards and general rigging from 2mm to 18mm.
...
[ more info ]
[ more info ]
316 Stainless steel eye terminal for wire rigging.
Part
Description
Internal Body Diameter
...
[ more info ]
[ more info ]
316 Stainless steel fork terminal for wire rigging.
Part
Description
Internal Body Diameter
...
[ more info ]
[ more info ]
316 stainless steel threaded swaged stud for wire rigging.
Part
Description
G Metr
Length
...
[ more info ]
[ more info ]
316 Stainless steel 'T' terminal for wire.
Part
Description
Overall Length
Interna...
[ more info ]
[ more info ]
