TBS10 Non Slip Self Adhesive Strip Tapes

Description

Fine-grade non-slip covering recommended for occasional pedestrian use.

Applications:

• Gateway cut
• Descent cockpit
• Stair nosing
• Aerial work platforms
• Steps
• Recreational vehicles rails and utilities
• Access ramps for disabled
• Domestic equipment
• Tank domes
• Containers

Characteristics

• Chemical composition :  high performance non-slip polyurethane elastomeric complex on permanent adhesive film with high adhesive strength.
  
  Thickness: 1mm. Weight: 600gr/sqm. Non-abrasive flexible granules 800µ.
  
  Non-slip performance  : friction coefficient measured on a test surface via SRT pendulum according to standard NFP 98831-4 (friction coefficient value corrected to 100.) By the Bridge and Roadway Agency laboratory in Angers, France. Measurement in dry conditions : 90 Measurement in wet conditions : 65
  
  Resistance: very good resistance to UV rays (classified 7 on the standardized scale of 1 to 7 for blue textiles) Very good resistance to natural chemical agents, oils, greases, hydrocarbons and salt water.
  Excellent resistance to abrasion and impacts.
  
  Resistance in varying temperatures: from -30°C to +80°C
  Flexibility - Distortion: extension = 20% before breakage.
  
  Ease of maintenance: clean regularly with water and traditional detergents.
  
  Testing and Standards: Fire-resistance testing, test with radiation according to the standard NF 92-501 carried out by the national Metrology and Testing Laboratory (LNE) classified as M3 on a steel plate base. Opacity and toxicity of fumes, Classified F2 according to the NF F 16-101 and 16-102 Standards.