Size 40 Aluminium drum two reduced speed winch
- Height: 157mm
- ø base (D): 153mm
- ø drum (d): 80mm
- Weight: 4.4kg
- Power 1: 12.8
- Power 2: 40
- Recovery (manual use) 1: 125mm
- Recovery (manual use) 2: 40mm
- ø Min line: 6mm
- ø Max line: 12mm
- Fixing screws: 5 x 8mm
- Gear ratio 1: 2:1
- Gear ratio 2: 6.4:1
SKU: AT-XT40AL
Size 40 two reduced speed winch.
14 new self-tailing winches available in the following versions: Hard black aluminium (AL): the aluminium drum is hard black anodized and teflon coated, scratch-proof and very hard-wearing. Chrome (CH): the drum, ST disks and ST arm are entirely chrome-plated. All chromed parts are highly polished, thickly nickel-plated and finally finished in chrome. Bronze (BN): the drum, ST disks and ST arm are entirely chrome-plated. All chromed parts are highly polished, thickly nickel-plated and finally finished in chrome.
Simple opening: just unscrew the upper ring to immediately dismantle the winch for easy of cleaning and maintenance. New self-tailing XT system: fixed upper disk with built in ST arm and self-regulating lower disk on springs. The new self-tailing adapts automatically to a wide range of rope diameters and, if overloading occurs, releases the line to avoid excess force on the ST arm. Knurling: the drum vertical knurling offers maximum horizontal friction allowing the rope “slide” upwards. Differentiated grip (aluminium drums only): minimum friction on the lower part where loads are higher and maximum at the top where loads are minimal: the result is an even grip along the entire drum. CNC base: machined by CNC (computer numeric control machines) is lighter and stronger than normal castings; aluminium made, hard black anodized and teflon coated. Easy removal from the winch makes maintenance a simple affair.
SKU: AT-XT40
- Height: 157mm
- ø base (D): 153mm
- ø drum (d): 80mm
- Weight: 4.4kg
- Power 1: 12.8
- Power 2: 40
- Recovery (manual use) 1: 125mm
- Recovery (manual use) 2: 40mm
- ø Min line: 6mm
- ø Max line: 12mm
- Fixing screws: 5 x 8mm
- Gear ratio 1: 2:1
- Gear ratio 2: 6.4:1
SKU | AT-XT40 |
Brand | Antal |