Size 44 Aluminium drum two reduced speed winch


  • Height:   185mm
  • ø base (D): 173mm
  • ø drum (d): 93mm
  • Weight: 6.2kg
  • Power 1:  20
  • Power 2:  43
  • Recovery (manual use) 1:  80mm  
  • Recovery (manual use) 2:  38mm
  • ø Min line: 8mm
  • ø Max line: 14mm
  • Fixing screws: 6 x 8mm
  • Gear ratio 1:  3.7:1
  • Gear ratio 2: 8:1

SKU: AT-XT44AL

$2,506.05
Backorder Available

Finish

Size 44 two reduced speed winch.

14 new self-tailing winches available in the following versions: Hard black aluminium (AL): the aluminium drum is hard black anodized and teflon coated, scratch-proof and very hard-wearing. Chrome (CH): the drum, ST disks and ST arm are entirely chrome-plated. All chromed parts are highly polished, thickly nickel-plated and finally finished in chrome. Bronze (BN): the drum, ST disks and ST arm are entirely chrome-plated. All chromed parts are highly polished, thickly nickel-plated and finally finished in chrome.

Simple opening: just unscrew the upper ring to immediately dismantle the winch for an easy of cleaning and maintenance. New self-tailing XT system: fixed upper disk with built in ST arm and self-regulating lower disk on springs. The new self-tailing adapts automatically to a wide range of rope diameters and, if overloading occurs, releases the line to avoid excess force on the ST arm. Knurling: the drum vertical knurling offers maximum horizontal friction allowing the rope “slide” upwards. Differentiated grip (aluminium drums only): minimum friction on the lower part where loads are higher and maximum at the top where loads are minimal: the result is an even grip along the entire drum. CNC base: machined by CNC (computer numeric control machines) is lighter and stronger than normal castings; aluminium made, hard black anodized and teflon coated. Easy removal from the winch makes maintenance a simple affair.

Classic series winches (CHC & BNC) are supplied not only with a chromed drum, ST disks and ST arm, as the chrome series models (CH & BN), but also with a chromed lower skirt, thus being completely chromed. The chrome-plating is carried out with great care to guarantee maximum durability. First the units are highly polished, then thickly nickel-plated and finally finished in chrome or bronze.

SKU: AT-XT44

  • Height:   185mm
  • ø base (D): 173mm
  • ø drum (d): 93mm
  • Weight: 6.2kg
  • Power 1:  20
  • Power 2:  43
  • Recovery (manual use) 1:  80mm  
  • Recovery (manual use) 2:  38mm
  • ø Min line: 8mm
  • ø Max line: 14mm
  • Fixing screws: 6 x 8mm
  • Gear ratio 1:  3.7:1
  • Gear ratio 2: 8:1
SKU AT-XT44
Brand Antal

More From This Category