Size 48 two reduced speed Race winch


Height: 197mm

Base (D): 182mm

Drum(d): 93mm

Weight: 5.3kg

Min line: 8mm

Max line: 14mm

Fixing screws: 6 x 8mm

SKU: AT-XT48R

$3,486.55
Backorder Available

XT R is the racing winch series obtained from the standard XT series. Self-tailing XT system, differentiated grip of the drum knurling, CNC base and skirt, fast opening screwed ring, axle with low friction PVD finishing.

And in addition to reduce the weight: aluminium stem, peek roller bearings for the drum and the main shaft lightened gears and main shaft. To reduce weight, XT series winches are mounted on bearings with peek resin roller on an aluminium stem. Antal alloy gears mounted on low-friction and hard wearing PVD treated axles; corrosion-proof insulating gaskets. The base, machined by the CNC process (produced with computer numeric control machines with no cast components), is lighter and stronger than normal castings.

14 new self-tailing winches available in the following versions: Hard black aluminium (AL): the aluminium drum is hard black anodized and teflon coated, scratch-proof and very hard-wearing. Chrome (CH): the drum, ST disks and ST arm are entirely chrome-plated. All chromed parts are highly polished, thickly nickel-plated and finally finished in chrome. Bronze (BN): the drum, ST disks and ST arm are entirely chrome-plated. All chromed parts are highly polished, thickly nickel-plated and finally finished in chrome.

Simple opening: just unscrew the upper ring to immediately dismantle the winch for an easy of cleaning and maintenance. New self-tailing XT system: fixed upper disk with built in ST arm and self-regulating lower disk on springs. The new self-tailing adapts automatically to a wide range of rope diameters and, if overloading occurs, releases the line to avoid excess force on the ST arm. Knurling: the drum vertical knurling offers maximum horizontal friction allowing the rope “slide” upwards. Differentiated grip (aluminium drums only): minimum friction on the lower part where loads are higher and maximum at the top where loads are minimal: the result is an even grip along the entire drum. CNC base: machined by CNC (computer numeric control machines) is lighter and stronger than normal castings; aluminium made, hard black anodized and teflon coated. Easy removal from the winch makes maintenance a simple affair.

Classic series winches (CHC & BNC) are supplied not only with a chromed drum, ST disks and ST arm, as the chrome series models (CH & BN), but also with a chromed lower skirt, thus being completely chromed. The chrome-plating is carried out with great care to guarantee maximum durability. First the units are highly polished, then thickly nickel-plated and finally finished in chrome or bronze.

SKU: AT-XT48R

Power 1: 19

Power 2: 47.4

Recovery (manual use) 1: 84mm

Recovery (manual use) 2: 34mm

Gear ratio 1: 3.5:1

Gear ratio 2: 8.8:1

Height: 197mm

Base (D): 182mm

Drum(d): 93mm

Weight: 5.3kg

Min line: 8mm

Max line: 14mm

Fixing screws: 6 x 8mm

SKU AT-XT48R
Brand Antal

More From This Category