8mm X 35mm St/St Rudder Pintle

Freight will be calculated during Business Hours by our Team after your order has been received.

We will contact you via email once your order is updated for your Approval and Payment.

Payment can then be made by Credit Card or Direct Deposit.

Due to network delays and congestion please be aware some deliveries may experience delays. All our shipments have tracking.

Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern DeckHardware’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘DeckHardware’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is F5, 122-126 Old Pittwater Road, BROOKVALE, NSW, 2100, . Our ABN is 70052499484. The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

SKU	A4017-35
Barcode #	5055276506553
Brand	Allen Brothers

Baby Splice Tool

30mm Triple Articulating Dynamic Bearing Block with Fixed Ey

Stainless Steel T track slider with screw pin

8-10mm V-cam 814, triple clutch, black resin handle

2 inch Composite Pole End UTR

Hatchseal Tape 3m x 19mm x 3mm

Mushroom thru-hull valve with 90° barb 1 inch

LIROS Rope Sample

Tuff Luff Extrusion Only 1706-46ft

Size 5 Standard non ST Winch, 1 speed

8mm X 35mm St/St Rudder Pintle

You May Also Like

8mm St/St Transom Gudgeon

8mm St/St H/D Transom Gudgeon

8mm Alloy Transom Gudgeon

8mm ST/ST Transom Gudgeon

More From This Category

8mm X 42mm St/St Rudder Gudgeon

8mm X 45mm St/St Rudder Pintle

8mm St/St H/D Transom Gudgeon

7.9mm 20mm Rudder Gudgeon Alloy

Service

About Us

Information

Stay In Touch

8mm X 35mm St/St Rudder Pintle

Notify me when back in stock

You May Also Like

More From This Category

Service

About Us

Information

Stay In Touch

Freight shown is the Minimum charge

Terms & Conditions

Privacy Policy