This model has been designed to control the spinnaker pole car but can also be useful for the genoa or the main car control.
Read the related article on the use of Line Drivers
Line drivers mount a self tailing sheave which operates in both direction with a textile “gripping” system that is efficient even if the circuit is not under strain and causes no wear in the rope. A clutch pin sets the direction in which the traveler moves, or allows for it to be locked in the required position. The power ratio obtainable with a normal (250 mm) handle is 8 to 1, which is much better than a tackle can offer; moreover, this system has a very limited size and weight.
- Length: 150mm
- Width: 90mm
- Height: 58mm
- Weight: 1.4kg
- Power 1: 8
- Line: 10mm
- B: 150mm
- Fixing screws 3 x cylindrical
- Screw size: 8mm