Modular Track - Barton
Lightweight 20mm, 26mm and 30mm hollowed aluminium track that retains high load capacity.
The grey anodised finish is extremely durable and adds to the friction-free efficient performance of these products. All systems are available in black and silver anodised finish
Three styles of track are available:
Drilled track
The most commonly used, drilled and countersunk at 100mm centres, with the first hole at 50mm from track end.
Sliding bolt track
To allow for a smooth profile with no visible fastenings. Also makes retro fit an easier job, as bolts can slide along the extrusion to match existing fastening holes.
Beam track
Use beam track when spanning cockpits or companionway hatches, where unsupported length is required. A minimum of three fastenings should be used on either side of the unsupported length - place fastenings at 100mm centres in supported sections.
