Hydraulic powered line driver
- Motor: Hydraulic 25cc
- Line size: 12/14mm
- Weight: 22kg
- Working load: 1800kg - pressure 100 Bar
- Car speed m/sec: 0.10 - Flow 25 1/min
- Main car model: 614.239
- Main car size: 47 x 430
- Length: 274mm
- Width: 197mm
- Height: 62mm
- Weight: 22kg
- A: 278mm
- B: 275mm
- C: 100mm
- E: 114mm
- D: 375mm
SKU: AT-LD1500HD
A Line Driver is a clean and efficient deck part whose purpose is to support mainsheet traveler adjustment. It works by connecting to a traveller in a closed circuit and it does the job of moving the traveller port and starboard without a winch. Read the full article on Line Driver
The control system is connected to a traveler on a closed circuit and ensures efficient control and a clean layout for systems such as the mainsail sheet.
Line drivers mount a self-tailing sheave which operates in both directions with a textile “gripping” system that is efficient even if the circuit is not under strain and causes no wear in the rope. This is a solution done for the control of the main car with a simple “self-tailing” sheave on the deck, with a motor and gearbox under the deck. Three sizes are available in 700, 1000 and 1500 W motors in 12 or 24 Volt version.
For the circuit diagram and accessories, such as switches, control-boxes and breakers, see the document Electric system and accessories in pdf.
Now available LD1500 Hydraulic powered line driver.
SKU: AT-LD1500HD
- Motor: Hydraulic 25cc
- Line size: 12/14mm
- Weight: 22kg
- Working load: 1800kg - pressure 100 Bar
- Car speed m/sec: 0.10 - Flow 25 1/min
- Main car model: 614.239
- Main car size: 47 x 430
- Length: 274mm
- Width: 197mm
- Height: 62mm
- Weight: 22kg
- A: 278mm
- B: 275mm
- C: 100mm
- E: 114mm
- D: 375mm
SKU | AT-LD1500HD |
Brand | Antal |